Floor Squeegee Harbor Freight (2024)

FAQs

Do you push or pull a floor squeegee? ›

You can only pull the squeegee (not bi-directional)

Ensure Squeegee Level and Proper Down Force: The squeegee blade should be level with the floor surface, and apply the right amount of force. Adjust the squeegee mechanism as needed to maintain proper alignment. Too much or too little pressure can affect the squeegee's ability to remove liquid efficiently.

A squeegee is a tool with a blade that removes or controls liquids across surfaces. Commercial squeegees can be used on floors to absorb liquids and direct mop water towards a drain, or to remove residual water or cleaning solvents from windows and mirrors.

The modern single-blade window cleaning squeegee was patented by Ettore Steccone in 1936, who dubbed it the "New Deal". It was made of lightweight brass with a very flexible and sharp rubber blade. Steccone began a manufacturing process and sold the product in his garage.

Floor squeegee blade material

Thermoplastic rubber is relatively common, but true silicone rubber is less porous and notably more durable. If you need to tackle heavily soiled floors on a regular basis, consider a squeegee made from Neoprene foam like the Haviland 0736.

Shower squeegee to the rescue! Standing water, especially hard water, can cause mineral stains and promote the growth of bacteria, mold and mildew in your bathtub. Every time you take a bath, all the dirt will stick to your tub if you don't clean it after use.

Neoprene is a popular squeegee choice because they resist breakdown better than rubber blades. Polyurethane squeegee blades are the most expensive option, but they are also the most durable.

Hotsy's Squeegee Blade, a.k.a. the California Blade, is a quick and easy way to remove water from your vehicle's windows. If a vehicle is rinsed with soft water, the Hotsy Squeegee Blade can be used to remove water from all exterior vehicle surfaces without streaking or spotting.

Change the squeegee rubber often

Sharp or new replacement blades mean less window streaking. A standard rule of thumb is to change it after 15 hours of use (or sooner if needed). Always keep a few extra on hand.

Let's dive into some frequently asked questions about one of the most important tool in any window cleaner's toolbag: the squeegee! It is recommended that you replace the blade on your squeegee every 6-12 months, depending on how frequently you use it.

Do you push or pull a mop? ›

If you're using a rag mop, follow a figure-8 motion as you push the cleaning tool. This is the most effective way to use the mop's design. If you're using a sponge mop, a straight forward and backward motion is good enough.

Using your squeegee, start from the top of the glass and go directly down to the bottom. Start again at the top but move the squeegee over slightly, so that the next path slightly overlaps the last path you took. Repeat until you've removed all water from the glass.